Zenrox offers cutting-edge medical equipment and comprehensive support services in Lagos. Explore our products designed for superior healthcare delivery. Contact us today for innovative medical solutions.
These microscope slide cover slips are made out of glass and are essential equipment for the lab. They can be used to keep solid specimens pressed flat, and liquid samples shaped into a flat layer of even thickness. They’re approximately 0.13mm to 0.17mm thick.
Features:
Measures 22mm square
Box of 100 cover slips
Made from glass
Dimensions:
Thickness (mm): 0.13 – 0.17
Length (mm): 22
Width (mm): 22
·
·
The compact design incorporates a clear 63mm Ø integral vacuum gauge is built inside the regulator body.
·
·
Analog Display:± 5% of Full Scale defleectn. Metal back plate making the unit strong and reliable reducing repair costs.
·
Accurate suction control within ranges 0 -300mmbar (LoSuck)and 0-760mmbar (High Suck)
·
Quick mode selector toggle switch for REG/OFF/FULL vacuum.
·
The large control knob comes with three (3) easy-to-read settings making vacuum adjustments simple, even in emergency situations.
Infection control easy to clean and wipe down
·
·
Variety of inlet connections available BS, AFNOR, DIN and DISS
Outlet connection 1/8” female NPT
·
Safety trap recommended for use for protecting regulators and preventing accidental overflow, these connect directly
Pendants, Flowmeters & Bed Heads
Built from individually heat treated extruded aluminum sections, the unit provides separate compartments for medical gases and electrical services. Furthermore, the gas
Brass Munsen Ring-m10
to the unit 1/8” male NPT
CryoIQ device is perfectly fitted for treatment of warts and other common skin lesions. Its unique construction with a built-in non-return valve prevents gas leakage thus giving a maximum use of the gas content. Areas of application are general practice, dermatology, pediatrics, podiatry, aesthetics, veterinary and gynecology/urology. The device uses a state-of-the-art cooling technology that does not require handling of potentially dangerous gases and liquids meaning that the gas cartridge is safely replaced when empty. The device features an ergonomic design where the cooling medium is evenly, accurately and economically distributed by depressing the metering lever.
Features:
Simple pencil type grip for an easy and very accurate application
Freezing temperature
Liquid spray freezing, -89°C / -128°F
Level of cold generated is adjusted by the rate at which the metering lever is depressed
CE marked according to Medical Device IIa
Technical Specifications:
Name: CryoIQ® DERM plus Liquid
Order.no: CIQ-DP-L
Delivered in: Plastic case
Included in delivery: 1 gas cartridge (16 gram) with valve
Weight: 82 gram (including 16 gram cartridge)
Dimensions: Diameter: 22 mm / Length: 120 mm
Freezing temperature: -89°C / -128°F
Material: Gold plated metal
Patented: Yes
CE marked: According to medical device IIA
Warranty: 1 years (2 years after Product registration)
Gas cartridge: 16 or 25 gram
Nitrous Oxide Gas (N2O)
Medical sterile
Built-in filter (5 µm)
CryoIQ® PRO Contact is based on our contact freezing system (closed gold plated metal contact tips with diameters of 1, 3, 5, or 7 mm). It provides precise treatment of the affected skin areas only in the size of the contact applicator without damage to the surrounding healthy tissue. The most versatile model for contact freezing treatment of warts and common skin lesions. Its unique construction with a built-in non-return valve prevents gas leakage, thus giving maximum use of the gas content. With the new PRO model, you now have the possibility to change the tip for different areas of application, such as dermatology, dentistry, podiatry, gynecology/urology, and veterinary.
Features:
Simple pencil type grip for easy use and accurate application
A broad range of applicators
Freezing temperature
Liquid freezing, -89°C / -128°C
Contact freezing, -80°C / -112°C
The level of cold generated is adjusted by the rate at which the metering lever is depressed
CE marked according to Medical Device II
Technical Specifications:
Name:
CryoIQ® PRO Contact
Order.no:
CIQ-P-C
Delivered in:
Plastic case
Included in delivery:
1 gas cartridge (16 gram) with valve
Weight:
82 gram (including 16-gram cartridge)
Dimensions:
Diameter: 22 mm / Length: 130 mm
Freezing temperature:
“Liquid freezing”, -89 °C / -128 °F
“Contact freezing”, -80 °C / -112 °F
Contact surface for CIQ-P-C:
Diameter: 1, 3 or 5 mm
Material:
Gold plated metal
Patented:
Yes
CE marked:
According to medical device IIA
Warranty:
1 year (2 years after Product registration)
Gas cartridge:
16 or 25 gram
Nitrous Oxide Gas (N2O)
Medical sterile
Built-in filter (5 µm)
The low temperature medicine is a medical science of studying the impact of low temperature on the human tissue based on the cryobiology and applying the low temperature technique to treat diseases. Its main contents include: low temperature physiology, cryopreservation, freezing and immunization, cold injury, and low temperature cryotherapy for therapeutic Applications.
Technical Specification:
Display: 12 inch touch screen
Treatment time: 1 min- 99 min, adjustable
Airflow output: 1-10 levels adjustable, 30L/min-120L/min, range 10L/min
Standby Situation: -14ºC~-22ºC
Automatic defrosting: Every two hour
Treatment mode: Customized mode and preset mode
Liquid level detection: Condensated water level is detected, overflow is warned
Therapeutic Effect:
> Lower body temperature
>> Analgesic spasmolytic
>> Destructive effect
>> Relieve local congestion or bleeding
>> Control the spread of inflammation to diminish it
>> Stop itching and sedation
>> Immunization.
Therapeutic Techniques:
(I) Ice bag sticking method
It is quite simple and the most commonly used method, which is widely used in the clinical treatment.
(II) Cold and heat hot pack
Put the tower into the cold water or ice water, wring it to semi-dry (namely, no water drops), and apply it to the affected area.
Application scopes and contraindications are the same as above.
(III) Chemical refrigeration bag
(IV) Tetrachloroethane jetting
(V) Local soaking method
(VI) Cold bath from head to foot
(VII) Body cavity method
This Foldable stretcher is made of high strength aluminum alloy material and fluid resistant PVC stretcher surface; It can be converted to a chair, be stored in limited spaces, and has two wheels engineered for easy operation
Medium & Large 100L sterilizers Recommended for Small & Medium Medical Hospitals, Community Healthcare Centers, Military Hospitals and big surgical instruments can be sterilized.
Features:
Easy to install
Simply plug into a standard 220v outlet and your HPS series sterilizers are ready to go. You won’t need additional facilities such as compressed air, drainage system, ventilation system.
Easy to use
You can start/cancel/control the sterilization process by simply pushing key buttons. The selected sterilization cycle will be progressed automatically and you can monitor relevant information such as sterilization conditions, progress status, error messages from the display.
Automatic notification system for regular maintenance
Your HPS series sterilizer will automatically notify you the replacement period of consumables such as pump oil, air filter and so on. After 250 cycles of sterilization, a warning message to change oil will be displayed and your sterilizer will stop working when reaches 300 cycles without change of oil to prevent equipment failure.
Self-Test Features
When malfunction occurs during operation, an error code is displayed by self-test features and the running sterilization cycle is interrupted automatically for safety.
Validation of Sterilization of HPS?100
A PCD(Process Challenge Device) in accordance with EU standards(EN 867-5) is used for the validation of sterilization of HPS-100 series sterilizers at the most difficult positions inside of the sterilization load so that the most challenging medical instruments including dead-end lumens can be sterilized efficiently and effectively. tem, ventilation system.
Specifications
Sterilizing Agent: Hydrogen Peroxide, 1 Cycle/Cartridge
Total Cycle Time :
1) Smart Mode – 40min
2) Standard Mode – 48min
3) Special Mode – 56min
Cycle Temperature : 45? ~ 60?
SAL(Sterility Assurance Level) : 10-6(Bacillus)
Material – Aluminum
Volume -100L
Dimensions : Overall – 700mm(W)×1610mm(H)×954mm(D), Chamber – 400mm(W)×358mm(H)×750mm(D)
Weight : 180?
Control : 32bit Micro Processor
Cycle Information : 2.7″(OLED) Display, Printer
Electrical : AC 220-230V~, 50/60Hz
Power Consumption : Max 3.4kw
Installation Requirements : Front – 100cm, Rear, Left side, Right side : 5cm
Placement : Bult-in wheels provide mobility
Room Conditions : Use Environment 10~40?, 30~75%RH, Installation Environment -20~60?, 0~95%RH
Printer : Built-in Thermal Printer(Brief Mode/Detail Mode) Cycle Parameters(Temp, Pressure, Time, Daily&Total Cycle, etc)
Click Here To Download Catalogue
This is an eight channel photometer for sequential and simultaneous reading of micro-plate strips with 96 wells. Shaking capability. Designed according to the most sophisticated technologies it turns out to be of high quality and reliability as well as of high precision and easy to use. With its powerful software it is able to perform readings, data processing and relevant memorization.
Technical Specifications:
Light source
8 tungsten lamps, automatically underpowered when in stand-by position
Optical filters
2 filters (450, 630 nm); 2 more on request (max 4 filters, 400-700nm)
Detectors
8 silicon photodiodes
Reading system
8 independent channels, mono or bichromatic reading
Inaccuracy
± 1% from 0.000 to 1.500 OD
± 2% from 1.500 to 3.000 OD
Reading time
16s to perform a monochromatic reading on a full plate; 31s for bichromatic reading
Cuvettes
96 well plate
Plate shaking
programmable by keyboard
LCD-Display
2 lines with 16 columns
Printer
40 columns on thermal paper
Keypad
17 buttons
Interface
RS232 serial port
Curves
curve direct plotting: point to point, linear regression and 4 parameters (log-logit)
Results
by strip of 8 or 12 wells (X or Y)
Calculation Mode
OD, direct Cut-Off or calculated, single calibrator, programmable curves from 2 to 12 points
Memory capacity
170 tests
Calendar/Timer
associates time with the results; timer function
Power requirements
230/115 VAC, 50-60 Hz, 110 W
Measurements
42 x 34 x 15 cm
Weight
8.3 Kg
OPTIONAL SOFTWARE
Plate Reader management software “ACTION” for PC
This Plate Washer that is an automated washer for micro-plates with 96 wells.
Features:
Original and versatile aspirate and dispense system: less than 3 µl of residue washing liquid.
The software powerful and versatile, is able to manage and memorize as much as 100 washing programs.
Programmable incubation capability.
In combination with the Plate Reader it turns out to be a complete work station for the washing and reading of ELISA tests.
The software allows the operator to execute any washing cycle; parameters setting through keyboard and display.
SUPERIORFINISH
Durable UV stable infection resistive finish with a polyurethane colour
BEARINGFORCE
235 kg capacity load of the chair (unit included)
DISINFECTIONSYSTEM
Manual disinfection system and amalgan separators available
COMFORTABLECHAIR
Synchronised chair movement with integrated anti-undress system
EASYNAVIGATION
5-instrument dentist element with an intuitive and simple foil keyboard for easy navigation
MORE HEADRESTOPTIONS
3D- or 2D-axis positioning headrest
OPTIONAL MOTIONSYSTEM
Movable bowl in Consul or LUX versions
Product features Includes
Ergonomic cordless lightweight design of only 90g
Slim shape for enhanced visibility
Two power modes and seven time options for adapted and precise settings
Digital display for accurate time setting
Powerful battery to perform over 600 ten-second cures without the need to recharge
Automatic switch-o ffmode after tree minutes of inactivity
Include
DEEP BLUE® LED curing light with fully sterilizable light guide
1 removable protection lens
1 rechargeable battery integrated
Charging station or external power
Deep vein thrombosis DVT-7700 MAIN is a DVT machine with HOSE and Accessories (Disposable sleeve thigh(M), Disposable sleeve calf(M), Disposable sleeve foot, and Tube (pair)) – Deep vein thrombosis (DVT) happens when a blood clot forms in a vein deep inside the body. Veins in the thigh, foot, and calf create a natural pumping system that helps flow blood back to the heart. But when an individual is immobile, blood circulation is decreased, and the risk of developing a blood clot goes up.
DVT machine Specifications:
Power requiremnet: 100V~240VAC, 50/60Hz
Power Consumption: Maximum 18w
Power Cord: Hospital Grade Plug (Detachable)
Operation Mode: A1,A2,A3,B1,B2,B3,B4,C1,D1,D2
Adjustable Timer: 0-99 Hours
Applied Pressure Leg sleeve: 30~60 mmHg (Caif, Thigh)
Food Cuffs: 130mmHg
Operation Mood: Continuous
Compression Type: Leg sleeve: Gradient, Sequential
Food Cuffs: Uniform
Dimension: 200mm (L) * 190mm (W) * 260 mm (H)
Weight: 2.3 kg (5.07 ib)
Battery: Capacity 10.8 Vdc 4,400 mAh Lithiumion (optional)
Run Time 6-8 Hours
Click Here To Download Catalogue
Applicationdomain: dental
Configuration: benchtop
Temperaturerange::134°C(273.2°F)
Min.: 121 °C (249.8°F)
Capacity: : 22 l (5.8 gal) Min.: 17 l (4.5gal)
Voltage
AC 220v ±10%
Frequency
50/60Hz
Wire Plug
GB 3 cores/EN 3 cores
Max Hp
1800VA
Electric current
10A
Physical Space
22L/17L
Class
European Class B standard
Sterilizing temperature
12°C, 134°C
Special sterilization
Kill active HV,HBV,BSE and spore
Dry procedure
Strong vacuum drying, the residual humidity<0.2%
Display
LCD, multi-languages
Test
Bowie& Dick, Leak
Safety
Safety valve, Automatic check
Sterilizing record
There ia a micro-printer optional and a standard USB
connector optional for sterilizing record
Water supply system
Twoopenedreservoirs(3.5Lfreshwaterand5litrewaste
water reservoirs), easy for sterilization and clean
Water quality detection
Detect whether water quality meet the requirement
Clean procedure
Automatic clean inside pipe and steam generator
Instrument containers
5 levels with 3 trays
Chamber size
249mm* 450mm/249mm*355mm