₦0.00
A-200 Baby Incubator
Mild skin temperature with two kinds of tank temperature control;
The set temperature, the inside temperature, skin temperature split-screen display;
Dual CPU control system, independent over-temperature cut-of device of the triple over-temperature protection;
Natural air duct humidification;
Cots step-less adjustable lt function;
Products with self-test function, a variety of fault alarm;
Spiral duct and AC and DC motors produce centrifugal supercharger, the overall aluminum tank;
The front panel has a function of temperature can be corrected;
Skin temperature sensor has come of protection function;
Baby compartment closed with automatic locking function;
A temperature data storage function; With oxygen input interface; With RS -232 interface.
Basic Configuration:
Host (including baby cabin, chassis, controller), infusion stand & trays, racks, skin temperature sensor.
Optional Configuration:
>37 c Temperature setting mode, lift the cabinet, feet, weighing device, can use low-noise DC motor
Optional Configuration: DECG & IUP, Foetal Stimulator, Telemetry Transducer System
Description
Description
Description
- Mild skin temperature with two kinds of tank temperature control;
- The set temperature, the inside temperature, skin temperature split-screen display;
- Dual CPU control system, independent over-temperature cut-of device of the triple over-temperature protection;
- Natural air duct humidification;
- Cots step-less adjustable lt function;
- Products with self-test function, a variety of fault alarm;
- Spiral duct and AC and DC motors produce centrifugal supercharger, the overall aluminum tank;
- The front panel has a function of temperature can be corrected;
- Skin temperature sensor has come of protection function;
- Baby compartment closed with automatic locking function;
- A temperature data storage function; With oxygen input interface; With RS -232 interface.
Basic Configuration:
- Host (including baby cabin, chassis, controller), infusion stand & trays, racks, skin temperature sensor.
Optional Configuration:
- >37 c Temperature setting mode, lift the cabinet, feet, weighing device, can use low-noise DC motor
- Optional Configuration: DECG & IUP, Foetal Stimulator, Telemetry Transducer System
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Vendor Info
Vendor Information
- No ratings found yet!
More Products
Omron Flex Temp Smart Thermometer
Ideal for use for the whole family
Rounded up for increased comfort
Reading shown in Celsius or Fahrenheit
Exchangeable batter
Durable SH/BL CURVED
Code
INS13-140
Operating Scissors Blunt/Blunt Curved 12.5cm
INS13-142
INS13-144
Operating Scissors Blunt/Blunt Curved 15cm
INS13-146
Operating Scissors Blunt/Blunt Curved 17.5cm
INS13-148
Operating Scissors Blunt/Blunt Curved 20cm
Related Products
Braun Perfusor? compact Syringe pump for use on all wards
Flexibility and mobility Performance data
Infusion rates from 0.1 to 99.9 ml/h Volume pre-selection Stackable, with a built-in locking mechanism Battery operable for more than 3 days
Features
Automatic recognition of syringe size/fixation Automatic bolus reduction after pressure alarm Occlusion alarm pressure limits selectable: 0.3/0.6/1.2 bar
Inspiration 7iVentilator
Optimum flexibility for hospitals and practices
Low cost of ownership
High-performance PSOL & active exhalation
Comprehensive graphics & trending with event markers
Infant through adult Invasive & non-invasive
Feedback-controlled NCPAP & NCPAP+ Intra-hospital patient transport
Intranet and Internet remote viewing Outstanding Heliox Management
Braun Braunostat? infusion stand For stationary and mobile applications
Holds up to three infusion pumps
Height-adjustable (1260 ? 2200 mm) infusion stand with hook holder for four infusion solution bags
Drip collector for infusion sets
Max. load 40 kp
Mobile safety base with 5 castor wheels, 2 are lockable
Braun Original Perfusor? ? Syringes For use with the Perfusor syring pumps
3-piece syringe for infusion pumps Original-Perfusor Syringe 20 m
Made of Polypropylene
Highly transparent barrel
High contrast graduation
Permanent markings
Ideal readability
Graduation inml
Centric Luer Lock cone for the attachment of a needle or for connection with other medical products (infusion tubing)
Oval grip plate for better handling of the syringe and for prevention of rolling
Safe plunger backstop to prevent unintentional withdrawal of plunger from barrel
Precision Brass Munsen Ring-m10
Munsen rings manufactured from brass with a single M10 tapping complete with brass screws. M10 to M6 reducing bush available on request. Suitable for suspending copper tube complying with BS EN 13348 & BS EN 1057 (formerly BS 2871) with metric threaded studding or screws.
ORDERING INFORMATION
Size
Part Number
SSM
12mm
12MUN
100
15mm
15MUN
100
22mm
22MUN
100
28mm
28MUN
50
35mm
35MUN
40
42mm
42MUN
20
54mm
54MUN
20
76mm
76MUN
5
108mm
108MUN
1
eVoluon3eEssenal
Designed for better hearing, comfort and durability.
Comprehensive graphics and trending
High-performance internal gas source technology Dual valve technology for precise breath delivery Pediatric through adult
Invasive and noninvasive Transport ventilation support
Easy to use touch screen user interface
Reviews
There are no reviews yet.