-
Haier Biomedical Biological Safety Cabinet HR30-IIA2 has a world famous HEPA/ULPA filter which means the air filtering is cleaner. This safety cabinet has an independent high-efficiency motor to supply air, compensate filter membrane etc. automatic pressure compensation and has a flow rate of <10%. The HR30-IIA2 has a uniform downdraft, high-speed inflow, sample and user in the safe environment. Benefits ULPA filtration system Intelligent alarm Airflow blocking patent Electrical leakage protection Specifications HR30-IIA2 Working voltage and frequency 220V±10%,50±1 Hz Power (VA) 1300 Power of blower (W) 350 Airflow circulation 220/50 Main filter typical efficiency ULPA,99.9995%@0.12Œºm Exhaust filter typical efficiency ULPA,99.9995%@0.12Œºm Downflow velocity (m/s) 0.3Haier HR30-IIA2
-
Product Specification Class Class II Product Type Type A2 Model HR40 Operator 1 Interior Dimensions 1200*610 *680 mm Overall dimensions 1360*780 *2200 mm UV light Greater Than 30w Noise Less than 62dB(A) IIIumination Greater Than 800Lx Inflow Air Velocity Greater Than 0.6m/s Downflow Air Velocity Greater Than 0.3+- 0.02m/s Cleanliness CLASS 100@ Greater Than 0.5um Product Other Details: Product Feature: Fission structure : The front panels are detachable and easier to remove for filter and filter. Visible windows: with antiultraviolet toughened glass and the height of glass can be adjustable. If the height is higher than safe level, the audible and visual alarm will be opened. The cabinet: all manufactured by 304??? stainless steel material and the left, right and back bins of cabinet are manufactured together with arc angle will make easier to clean the side of cabinet. Cabinet feature: Contaminated Pressure Plenum: Negative Unitized drain pan beneath the work surface allows best arm position the user’s lap. The airflow design creates a more impenetrable air barrier or momentum air curtain at the front of the cabinet, increasing the cabinet’s protective capabilities and avoiding cross infection. This kind of design standard is comply with NSF4911 standard. With strong wind form the draught intake in side of cabinet, which will clear the round airflow up in lateral cabinet and prohibit the moving of contamination. Ultra-high efficiency filter system: input and output of air will be filtrated by ULPA filter and its efficiency is more than 99.999%. the pressure sensor will watch the working condition of filter from time to time and alarm the operator if the operator if the pressure is over the setting value. Ultraviolet light safety: the UV light cannot be opened when the fan, visible window and fluorescent light are running. Interlock function for two fans ( blower and exhaust fan ): When the exhaust fan stops, the blower will stop automatically and alarm device will begin to work. When the blower stops, the exhaust fan will continue to work and the alarm system will indicate the fault of blower. Displaying data in the screen: Air-exhaust value ( m3/h ) the velocity of air laminar flow ( m/s ) counter for exhaust fan counter for blower. Safety control system: Alarm for low air exhaust value Alarm for low air-velocity of down laminar flow Alarm for fault of exhaust fan Alarm for closing condition of visible window When the visible windows is opened, the UV light will be closed automatically. When the fluorescent light is on working, the UV light will be closed automatically. When the blower begin to work and then the UV light will be off after air laminar flow is created. The blower will be off automatically if the exhaust fan happens some trouble. The exhaust fan will increase his rotate speed automatically in order to keep the working space in negative pressure inside cabinet in case something wrong happens with the blower. Microprocessor will counteract the gradually increased resistance in filter. It will keep air inflow and downflow in normal condition under any conditionsHaier HR40-IIA2
-
Handheld Digital Auto-refractometer(AutoSight 900) is a portable vision screener for patients at any age. Its working principle is the refraction of light. Optical rays are focused on a sensor after passing through the eye’s refractive system. The spherical power, cylindrical power, and axis of both eyes can be obtained by digital signal processing. Features of Handheld Digital Auto-refractometer: Quick: Automatic and convenient. Press the button at the working distance (35cm/14in) and that’s it. The result will be automatically shown in 5 seconds. Accurate: Objective measurement of diopter is obtained from optical signal. The result is not affected by various external factors. Intelligent: Detects multiple eye problems in one measurement including myopia, hyperopia, astigmatism and anisometropia Technical Specifications of Handheld Digital Auto-refractometer: Item Range Interval Tolerance Spherical (S) Myopia Mode -9.00D~ +2.50D 0.25D ±0.50D or ±20% (whichever is greater) Normal Mode -6.00D ~ +8.00D Cylindrical(C) -3.00D~0.00D 0.25D ±0.50D or ±20% (whichever is greater) Axis(A) 0°~180° 1° ±5°Handheld Digital Auto-refractometer
-
Hot
Jaundice is one of the most common symptoms in the neonatal period. Clinical reports show that 20% to 30% of newborns may have visible jaundice. And early neonatal pathological jaundice is prone to bilirubin encephalopathy, so it is important to screen for early pathological jaundice. DHD-C Percutaneous Jaundice Meter physical sample and advantages Large LCD display Two units displayed at the same time Average value display, more storage Lithium battery, long standby time Continuous measurement, no need to reset Technical Parameters: Measurement meth: light reflective Light source: LED Display: LCD Indication error: 0~25 mg/ dL ± 1.0 mg/ dL Power supply: Lithium battery (DC3.6V, 1000mAh ± 20%);Tests can be done more than 800 times after a fully charge; Calibration color screen: white end face is 0, yellow end face is 16.0±1.0 Function Simultaneous display of measurement units: displaying mg / dL & µmol / L in the meantime. Data Storage: 200 groups of measurement data Average Calculation: It can measure the average value of 2-5 times Start-up preparation time: Ready to use at startup, no preparation required Battery voltage detection function: When the battery voltage of the tester is too low, the screen displays “Low Battery” Automatic shutdown: Automatic shutdown after 10 minutes of non-working state Battery display: Real-time display of battery power Charging display: The viewing screen shows “Charging … ” during charging. Automatic charging protection: It will stop charging automatically at the time battery voltage charging arrive 4.2V±0.05V. Click Here To Download CatalogueHeal Force Percutaneous Jaundice Meter DHD-C
-
Heating Mantle PE-4100 (0.5L) Digital Purpose: the heating mantle is intended for heating liquids in round-bottomed flasks made of heat-resistant glass with the volume of 500 ml within the temperature range from the ambient one to 400°С Advantages: – two-zone heating with the possibility of switching off the heating of the top zone – heating element is made of safe fiberglass with nichrome wire which excludes permanent deformation and provides firm adherence to vessel walls to avoid heat losses and improve energy performance of the device – indication of parameters on the liquid crystal display – electronic (PID) temperature controller – automatic and heating tuning of the heating intensity – timer with visual and audible signalling of finishing of the heating – locking of the control to provide the protection against accidental change of the operation mode – possibility of connection of a remote sensor (option) – determination and indication of the possible faults and malfunctions – metal housing of the device is covered with powder paint KARUMEL which provides resistance to adhesion, scratching and corrosion Remarks: – the maximum heating temperature is reached when both heating zones are switched on – due to presence of heat losses, the liquid temperature in the vessel can never reach the maximum temperature of the heating element; therefore, the settable temperature is limited by a value of 400°С. Technical specifications: – Housing material: steel covered with powder paint resistant to chemical action – Heating element: fabric fiberglass with nichrome wire – Maximum heater temperature, °С – 450 – Flask volume, ml – 500 – Weight, kg – 3.4 – Power supply voltage (50/60Hz), V – 220-230 – Power consumption, W – 230Heating Mantle PE-4100 (0.5L) Digital
-
Purpose: the heating mantle is intended for heating liquids in 3 round-bottomed flasks with the volume of 500 ml within the temperature range from the ambient one to 450°С Advantages: – independent control of each heating element – two-zone heating with the possibility of switching off the heating of the top zone – heating element is made of safe fiberglass with nichrome wire which excludes permanent deformation and provides firm adherence to vessel walls to avoid heat losses and improve energy performance of the device – indication of parameters on the liquid crystal display – electronic (PID) temperature controller – automatic and heating tuning of the heating intensity – timer with visual and audible signaling of finishing of the heating – locking of the control to provide the protection against accidental change of the operation mode – possibility of connection of a remote sensor (option) – determination and indication of the possible faults and malfunctions – metal housing of the device is covered with powder paint KARUMEL which provides resistance to adhesion, scratching and corrosion – complete set of supports is included Remarks: – the maximum heating temperature is reached when both heating zones are switched on – due to presence of heat losses, the liquid temperature in the vessel can never reach the maximum temperature of the heating element; therefore, the settable temperature is limited by a value of 400°С Technical specifications: – Housing material: steel covered with powder paint resistant to chemical action – Heating element: fabric fiberglass with nichrome wire – Maximum heater temperature, °С – 450 – Flask volume, ml – 3×500 – Weight, kg – 8.4 – Dimensions (LхWхH) – 610х310х120 – Power supply voltage (50/60Hz), V – 220-230 – Power consumption, W – 3×230Heating Mantle PE-4100-3 (3×0.5L) Digital with Set of Racks
-
Purpose: the heating mantle is intended for heating liquids in round-bottomed flasks with the volume of 500 ml within the temperature range from the ambient one to 450°С Advantages: – two-zone heating with the possibility of switching off the heating of the top zone – the heating mantle is equipped with electronic temperature controller – heating element is made of safe fiberglass with nichrome wire which excludes permanent deformation and provides firm adherence to vessel walls to avoid heat losses and improve energy performance of the device – automatic break of the device in case of overheating (the operation returns to normal when the temperature reaches allowable limit) – metal housing of the device is covered with powder paint KARUMEL which provides resistance to adhesion, scratching and corrosion Technical specifications: – Housing material: steel covered with powder paint resistant to chemical action – Heating element: fabric fiberglass with nichrome wire – Maximum heater temperature, °С – 450 – Flask volume, ml – 500 – Weight, kg – 3.3 – Dimensions (LхWхH) – 220х325х120 – Power supply voltage (50/60Hz), V – 220-230 – Power consumption, W – 230Heating Mantle PE-4100M (0.5L) analogue
-
Purpose: the heating mantle is intended for heating liquids in round-bottomed flasks made of heat-resistant glass with the volume of 2000 ml within the temperature range from the ambient one to 400°С Advantages: – two-zone heating with the possibility of switching off the heating of the top zone – heating element is made of safe fiberglass with nichrome wire which excludes permanent deformation and provides firm adherence to vessel walls to avoid heat losses and improve energy performance of the device – indication of parameters on the liquid crystal display – electronic (PID) temperature controller – automatic and heating tuning of the heating intensity – timer with visual and audible signaling of finishing of the heating – locking of the control to provide the protection against accidental change of the operation mode – possibility of connection of a remote sensor (option) – determination and indication of the possible faults and malfunctions – metal housing of the device is covered with powder paint KARUMEL which provides resistance to adhesion, scratching and corrosion Remarks: – the maximum heating temperature is reached when both heating zones are switched on – due to presence of heat losses, the liquid temperature in the vessel can never reach the maximum temperature of the heating element; therefore, the settable temperature is limited by a value of 400°С Technical specifications: – Housing material: steel covered with powder paint resistant to chemical action – Heating element: fabric fiberglass with nichrome wire – Maximum heater temperature, °С – 450 – Flask volume, ml – 2000 – Weight, kg – 3.8 – Power supply voltage (50/60Hz), V – 220-230 – Power consumption, W – 470
Heating Mantle PE-4130 (2.0L) Digital
-
Heating Mantle PE-4130M (2.0L) Analogue Purpose: the heating mantle is intended for heating liquids in round-bottomed flasks with the volume of 2000 ml within the temperature range from the ambient one to 450°С Advantages: – two-zone heating with the possibility of switching off the heating of the top zone – the heating mantle is equipped with electronic temperature controller – heating element is made of safe fiberglass with nichrome wire which excludes permanent deformation and provides firm adherence to vessel walls to avoid heat losses and improve energy performance of the device – automatic break of the device in case of overheating (the operation returns to normal when the temperature reaches allowable limit) – metal housing of the device is covered with powder paint KARUMEL which provides resistance to adhesion, scratching and corrosion Technical specifications: Housing material: steel covered with powder paint resistant to chemical action Heating element: fabric fiberglass with nichrome wire Maximum heater temperature, °С – 450 Flask volume, ml – 2000 Weight, kg – 3.8 Dimensions (LхWхH) – 220х345х130 Power supply voltage (50/60Hz), V – 220-230 Power consumption, W – 470Heating Mantle PE-4130M (2.0L) Analogue
-
Load capacity: 28KGS 60cm (23.6”) diameter concaved aluminum base Tilt Adjustable chart holder for writing or sundries collecting 45cm (17.5”) height adjustment range to accommodate different height users Minimum Height: 80cm (31.5”) Maximum Height: 125cm (49.5”) Slide-in mounting plate can be used with various bottom-mounted medical device No need for tools to adjust the tilt of mounting plate for optimal view angle Cable Hook for cable management Utility baskets with cord hooks 7.3cm (3”) diameter dual-wheel medical casters for easy transition over uneven surface, anti-static, 2 with brakes, and 3 without brakes. ( Various medical casters are optional) Provide mobile mounting solution for various medical devices, including patient monitor, fetal monitor, defibrillator, infusion pump, etc.Height Adjustable Rolling Stand with Concaved Base JRS-1001-10
-
Sale
Hematology Analyzer Mindray BC-5000 With Accessories
Original price was: ₦11,500,000.00.₦11,300,000.00Current price is: ₦11,300,000.00.Original price was: ₦11,500,000.00.₦11,300,000.00Current price is: ₦11,300,000.00. Add to cartQuick View
Zenrox Healthcare Solutions - Advanced Medical Equipment in Lagos
Zenrox offers cutting-edge medical equipment and comprehensive support services in Lagos. Explore our products designed for superior healthcare delivery. Contact us today for innovative medical solutions.
